Arduino Microcontroller Programming # Part_01
A microcontroller is like a small computer. It has a Processor, RAM, Flash Memory, Clock and Control Unit. According to the program of the control unit, this microcontroller is running ...
These microcontrollers are used in equipment such as airplanes, robots, artificial hearts, and other things we usually use at home, such as TVs, refrigerators, printers.
So this microcontroller needs to write a code and create a program to do certain things. You have to embed the program into the microcontroller. That's why the microcontroller program is ... This code is written in the same way as the code in a normal computer language. For that you need to install a special software package. This is known as the software interface. The code is then attached to a microcontroller to connect to the microcontroller and connect it to the computer. The hardware interface used is the device layout.
There are a number of software and hardware interfaces that can be programmed with microcontroller. Loweno is one of them.
Let's meet again
0 Comments